Table of Contents
Advertisement
- This feature is disabled if you press and hold the
button on the remote control and confirm to
shut the TV down.
- Before using the feature of networked waking up,
make sure the Quick start function is enabled.
- This function may not be available for certain
models.
- This feature is only available in Google TV mode.
Reset to factory default settings
Allows you to reset the TV to factory default settings.
1. Press
on the remote control, select Settings
> System > About > Reset > Factory reset and
press OK to enter.
2. Select the Factory reset option and press OK to
enter. Then select Delete everything and press
OK to confirm.
3. Enter the password you have set or the PIN
according to the on-screen prompt.
4. Select OK and press OK to confirm.
5. The Welcome screen appears. Follow the
instructions in the section Initial setup.
Using the hands-free TV voice control
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access
the Google website first. Then follow the steps below
to access.
1. Turn the built-in MIC switch (Please refer to the
Quick Start Guide to find the MIC switch on your
TV set) to on before using this function.
2. In Google TV mode, Press
control.
3. Select "Yes, I'm in".
4. Say "OK Google" or "Hey Google" to activate it.
Notes:
- This hands-free TV voice control is only available
for selected models. For details, please refer to
your local dealer.
- A quiet surrounding is required for better function
when using it. The recommended distance for
using the hands-free TV voice control is within 2
meters in front of it.
- Turn the built-in MIC switch to off if you are not
going to use it.
- The availability of hands-free TV voice control
depends on your region/country/language.
- Turn on both Quick start and Screenless
service in the Settings > System > Power and
energy menu to enjoy hands-free voice control
in TV standby mode.
on the remote
EN 14
- Standby power consumption will increase
because the built-in MIC is always listening
when the Google Assistant or voice control with
the built-in MIC is enabled.
- This feature is only available in Google TV
mode.
Variable Refresh Rate
Variable Refresh Rate is a feature that will allow
smooth gaming and eliminate screen tearing. The
refresh rate can dynamically change to up to 144Hz.
(Note: To use the function, Game Master needs to
be set to Auto or On in the System menu.)
This feature is available under source of HDMI1,
HDMI2, HDMI3 or HDMI4(the number of HDMI
socket on the TV will vary according to TV model).
Notes:
- 4K@144Hz is only available on HDMI 1 (not
available in all models). PC Graphics card must
be able to output 144Hz, please check your
graphics card specifications.
- 4K@120Hz is only available on HDMI 1 or HDMI
2.
- some models support refresh rate up to 120Hz.
- You need to make sure your Games Console or
PC support Variable Refresh Rate, and you may
need to check your games console settings to
activate the function.
- The game/content also will need to support
Variable Refresh Rate, and you may also need
to check the settings within the game.
Apple AirPlay and HomeKit
(* not available for some models)
Wirelessly share content with your TV using AirPlay
and control your TV using the Home app on your
iPhone, iPad, or Mac. You can set up AirPlay and
HomeKit at any time in Settings menu.
The function is enabled by default. To use the
function, make sure your iPhone, iPad, or Mac is iOS
or iPadOS device and the WiFi on the iOS or iPadOS
device is turned on. Then follow the steps below to
operate.
1. Press
on the remote control, select Settings
> System > AirPlay and HomeKit Settings >
Apple AirPlay and HomeKit and press OK to
enter, or press
(if available) on the remote
control, then select AirPlay > AirPlay and
HomeKit Settings and press OK to enter.
2. Press
to select the desired item and press
/
OK to enter the corresponding submenu.
3. Press
to return to the previous menu.
Using more of your TV
Advertisement
Table of Contents
