Table of Contents
Advertisement
Chapter 4 - Using more of your TV
Installing channels
This section describes how to search and store
channels automatically. This may be done in any of
the cases below:
- you have skipped the channel installation step in the
initial setup;
- you are prompted that there are no channels in TV
mode;
- you want to update your channels.
1. In TV mode, press
and select Settings > Channels and inputs >
Channel > Channel scan. Press OK / to enter.
2. The TV installs and arranges channels according
to your country or region. Press
Country/Region, and press OK /
Enter the password you have set in the
System > Lock
menu. Press
country or region and press
3. Press
/
to select Automatic search and
press OK to enter.
4. Press
/
to select Tuner mode and press
to select Cable, Antenna or Satellite. (Note:
/
Satellite option is available only in selected
models.)
5. Press
to select other options to configure.
/
6. After configuration is completed, press
Search and press OK to start scanning channels.
7. The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you want to edit the channel list,
press
on the remote control, select Settings
> Channels and inputs > Channel > Edit
Channels and press OK to enter.
Note: Edit Channels option is not available
when Tuner mode is set to Antenna and
Country/Region is set to United Kingdom.
Common interface
Encrypted digital TV channels can be decoded with a
common interface module and a card provided by a
digital TV service operator.
The common interface module may enable several
digital services, depending on the operator and
services you choose (for example, pay TV). Contact
your digital TV service operator for more information
about services and terms.
Using the common interface module
WARNING: Switch off your TV before inserting a
common interface module. Be sure to follow the
instructions described below. Wrong insertion of
a common interface module may damage both the
module and your TV.
on the remote control
/
to select
to enter.
Settings >
/
to select your
to confirm.
OK
to select
1. Following the directions printed on the common
interface module, gently insert the module into the
common interface slot on the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the common interface
module from the slot. Removing the module
will deactivate the digital services.
Accessing common interface services
After inserting and activating the common interface
module, press
on the remote control, select
Settings > Channels and inputs > Channel >
Common interface and press OK to enter.
This menu option is only available if the common
interface module is correctly inserted and activated.
On-screen applications and content are provided by
your digital TV service operator.
Using subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C/
DVB-S/DVB-T2/DVB-S2 digital broadcasts. With
digital broadcasts, you have the additional option of
selecting a preferred subtitle language.
Turning on/off subtitles
1. Press
on the remote control, select Settings >
Channels and inputs > Channel > Subtitle and
press OK / to enter.
2. Select the Subtitle option, and press OK to toggle
between on or off.
3. Press
to return to the previous menu.
Enabling subtitle languages on digital TV
channels
1. Press
on the remote control, select Settings
> Channels and inputs > Channel > Subtitle >
Digital subtitle language 1st and press OK
enter.
2. Press
to select a subtitle language as your
/
preferred language and press OK to confirm.
3. Press
to select Digital subtitle language
/
2nd and press OK
4. Press
to select a secondary subtitle
/
language and press OK to confirm.
5. Press
to return to the previous menu.
EN 11
/
to enter.
to
/
Advertisement
Table of Contents
