Table of Contents
Advertisement
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start / Pause
again.
The washing programme continues.
11.11 Cancelling a running
programme
1. Press the On/Off
the programme and to deactivate the
appliance.
2. Press the On/Off
activate the appliance.
Now, you can set a new washing
programme.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating the
ProSense phase. The water
and the detergent are not
drained out in order to avoid
waste. The display shows
the maximum duration of the
programme, updating it
about 20 minutes after the
starting of the new
programme.
11.12 Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
You can easily open the door for adding
or removing some items when the icon
is lighted on.
1. Touch the Start / Pause
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
button
button to cancel
button again to
button.
3. Close the door and touch the Start /
Pause
button.
The programme or the delay start
continues.
When the icon
goes off, the door can
be opened when the programme is
complete, or set spinning or draining
programme/option and than press Start /
Pause
button.
11.13 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Start / Pause
button goes off.
The door unlocks and the indicator
goes off.
1. Press the On/Off
deactivate the appliance.
After five minutes from the end of the
programme, the energy saving function
automatically deactivates the appliance.
When you activate the
appliance again, the display
show the end of the last
selected programme. Turn
the programme dial to set a
new cycle.
2. Remove the laundry from the
appliance.
3. Make sure that the drum is empty.
4. Keep the door and the detergent
dispenser slightly ajar to prevent
mildew and odours.
5. Close the water tap.
11.14 Draining water out after
end of cycle
If you have chosen a programme or an
option that does not empty out the water
of the last rinse, the programme is
completed, but:
ENGLISH
29
button to
Advertisement
Table of Contents
