Table of Contents
Advertisement
22
www.aeg.com
Problem
Traces of rust on cutlery.
There are residues of deter‐
gent in the dispenser at the
end of the programme.
Odours inside the appliance.
Limescale deposits on the ta‐
bleware, on the tub and on the
inside of the door.
Dull, discoloured or chipped
tableware.
Refer to "Before first use",
"Daily use", or "Hints and
tips" for other possible
causes.
13. TECHNICAL INFORMATION
Dimensions
Electrical connection
Water supply pressure
Possible cause and solution
•
Silver and stainless steel cutlery were placed together.
Do not put silver and stainless steel items close to‐
gether.
•
The detergent tablet was stuck in the dispenser and
therefore was not completely washed away by water.
•
Water cannot wash away the detergent from the dis‐
penser. Make sure that the spray arms are not blocked
or clogged.
•
Make sure that items in the baskets do not impede the
lid of the detergent dispenser from opening.
•
Refer to "Internal cleaning".
•
Start the
product designed for dishwashers.
•
Start the
dishwashers.
•
If limescale deposits still remain, clean the appliance
with appliance cleaners which are particularly suitable
for this purpose.
•
Try a different detergent.
•
Contact the detergent manufacturer.
•
Make sure that only dishwasher-safe items are wash‐
ed in the appliance.
•
Load and unload the basket carefully. Refer to the
basket loading leaflet.
•
Place delicate items in the upper basket.
•
Activate the GlassCare option to ensure special care
for glassware and delicate items.
Width / height / depth (mm)
Voltage (V)
1)
Frequency (Hz)
Wattage (W)
bar (minimum and maximum)
kPa (minimum and maximum)
programme with a descaler or a cleaning
programme with a descaler designed for
597 / 818 - 878 / 576
200 - 240
50 - 60
1550-2200
0.5 - 10
50 - 1000
Advertisement
Table of Contents
