Related Manuals for NCR VOYIX 7772-K151
Summary of Contents for NCR VOYIX 7772-K151
- Page 1 Biometrics Kit Instructions 7772-K151 Issue C Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited...
- Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
- Page 3 Table of Contents Copyright Biometrics Kit Contents Installation Procedure Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 4 Date Remarks Nov 2019 First Issue Jun 2020 Updated illustrations for steps 4 and 5 Added a note to step 9 Dec 2021 Added Warning statement Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 5 Biometrics This kit provides a Biometrics for either Port A or Port B of the following POS: NCR CX7 All-in-One POS (7772) NCR CX5 All-in-One POS (7773) Kit Contents Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 6 Remove the two (2) screws that secure the Cable Cover to the Back Cover. b. Rotate and unhook the Cable Cover from the Back Cover. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 7 Remove the Ethernet Cable from the Cable Management Hook then disconnect the Cable. 4. Loosen the two (2) captive screws that secure the Back Cover to the Display. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 8 5. Rotate the Back Cover away from the Display and unhook the Back Cover Tabs. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 9 6. Route the Biometrics Cable through the Port opening. 7. Route and secure the Cable under the Cable Management Hooks as shown. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 10 9. Hook the Biometrics into the display housing and snap into place. Note Pull the excess cable through the Port opening as you hook the Biometrics into the display housing. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.
- Page 11 10. Secure the Biometrics with a screw. 11. Reinstall the Display Back Cover. 12. Reconnect the 180-degree USB-C Cable and Ethernet Cable. 13. Reinstall the Cable Cover. Confidential and proprietary information of NCR Corporation. Unauthorized use, reproduction and/or distribution is strictly prohibited.