•
The switch is in the "OFF" position when charging.
If vacuum performance is poor, check the following:
•
Clean the filters. (See "Cleaning and emptying the
vacuum" section.)
•
Empty the dust bowl. (See "Cleaning and emptying the
vacuum" section.)
•
Clean the rotary brushes. (See "Removing and cleaning
the rotary brushes" section.)
•
The red LED flashes continuously, plug in the charger
and perform a recharge cycle
SERVICE INFORMATION
BLACK+DECKER offers a full network of company-owned
and authorized service locations. All BLACK+DECKER Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service centers
and if you need technical advice, repair, or genuine factory
replacement parts, contact the BLACK+DECKER location
nearest you, or visit us at www.blackanddecker-la.com
ENGLISH