Installing An Ses Driver; Installing On Windows Xp Computers; Installing The Driver Automatically - Western Digital My Book WDBAAJ0010HSL User Manual

Installing an SES Driver

A
1
If you do not install the WD SmartWare software, you must have an SES driver installed
on computers running Windows to keep the hardware popup wizard from displaying
every time you connect your My Book drive to your computer.
Note: The SES Driver is installed automatically when you install the
The following topics are included in this appendix:

Installing on Windows XP Computers

Installing on Windows Vista Computers
Installing on Windows 7 Computers
Installing on Windows XP Computers
After you physically connect the drive as shown in Figure 4 on page 8, the Found New
Hardware Wizard screen displays.
Note: If Autoplay is enabled, two additional screens might appear at the same
You can use the Found New Hardware Wizard to install the SES driver either:
• Automatically, if your computer is connected to the Internet
• Manually, whether your computer is connected to the Internet or not

Installing the Driver Automatically

To install the SES driver automatically, your computer must be connected to the Internet:
1.
Verify that your computer is connected to the Internet.
2. On the Found New Hardware Wizard screen, select Yes this time only to allow
Windows XP to connect to Windows Update:
3. Click Next to continue.
WD SmartWare software or if you clicked
Welcome to WD SmartWare screen (see "Getting Started Without
the WD SmartWare Software" on page 60)
time as the Found New Hardware Wizard screen. If they appear, close
them.
MY BOOK STUDIO AND STUDIO LX
Do Not Install on the
.
INSTALLING AN SES DRIVER – 63
USER MANUAL