Product Service - Panasonic RC-CD500 Operating Instructions Manual

Maintaining the Lens
Open the lid and clean the
iens.
Use a cotton swab to gently
wipe off any finger-prints.
Recommended product:
Lens cleaner kit
(SZZP1038C)
Frequency range
FM: 87.9-107.9 MHz (200 kHz steps)
87.5-108.0 MHz {100 kHz steps)
AM: 520-1710 kHz (10 kHz steps}
Sampling frequency 44.1 kHz
Decoding 16 bit linear
Semiconductor laser
{wavelength 780 nm)
2 channel, stereo
Less than possible measurement
data
MASH (1 bit DAC)
Beam source
No. of channels
Wow and flutter
DA converter
Speakers 8 cm (3")6 Ox2
Jacks
Output PHONES: 3.5 mm ({'/e") stereo
(32 Q)
AC 120 V, 60 Hz
Power consumption: 14 W
9 V (One 6GF22/6LR61, 006P bat-
Power requirement
Memory back-up
tery)
Dimensions (WxHxD) 300x 103 190 mm
(114/16 4/16" x 71/2")
Mass 1.85 kg (4 Ib 1 oz) without battery
Note:
Specifications are subject to change without notice.
Mass and dimensions are approximate.
Power consumption in standby mode: 1.4 W
Product service
Do not attempt to remove the cover(s) or repair the unit yourself. Refer
servicing to qualified personnel only.
Product information
For product service, product information or assistance with product opera-
tion, refer to the servicenter directory.
User memo:
DATE OF PURCHASE
DEALER NAME
DEALER ADDRESS
TELEPHONE NUMBER
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
CAUTION:
TO PREVENT ELECTRIC SHOCK MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK
OR PRODUCT DAMAGE, DO NOT EXPOSE THIS AP-
PLIANCE TO RAIN, SPLASHING, DRIPPING OR
MOISTURE.
&
Selecting fine audio equipment such as the unit you've just purchased is
only the start of your musical enjoyment. Now it's time to consider how
you can maximize the fun and excitement your equipment offers. This
manufacturer and the Electronic Industries Association's Consumer
Electronics Group want you to get the most out of your equipment by play-
ing it at a safe level. One that lets the sound come through loud and clear
without annoying blaring or distortion-——and, most importantly, without af-
facting your sensitive hearing.
We recommend you to avoid prolonged exposure to excessive noise.
Sound can be deceiving. Over time your hearing "comfort level" adapts to
higher volumes of sound. So what sounds "normal" can actually be loud
and harmful to your hearing.
Guard against this by setting your equipment at a safe level BEFORE your
hearing adapts.
To establish a safe level:
eStart your volume control at a low setting.
@Slowly increase the sound until you can hear it comfortably and clearly,
and without distortion.
Once you have established a comfortable sound level:
Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss
in the future. After all, we want you listening for a lifetime.