Kenwood TM-721A Instruction Manual page 13

LCD display
(indicators
? ? ORC) ® G}
f 1 [
wemm scan =| Lo ot + Revi cress|
HOO, | rhonoe
oy Para PER oe ee
xo ragga TT r= famaraaganres HEME
BUSY LOW i ABC] MUTE
i A common
g @ Indicator
| The MAIN band indicators |
Displays the operating frequency to
ae the nearest kHz, the frequency step,
and/or the tone frequency (TM-
es 721A only)
This level meter indicates the relative
receive input signal strength or
transmitter RF output.
ON whenever the squelch is open.
ON during transmit.
Om CALL ON when the CALL channel is ON.
@ SCAN ON when Scanning.
@- - Displays the selected transmitter off-
— -— set direction.
{TM-721E European version}
@ &T ON when the Tone function is ac-
tive.
® REV ON when the Reverse function is ac-
tive.
Indicates low power has been
selected.
ON when the Priority Alert system is
active.
ON whenever the F key is depressed.
(Always displays the last Memory
Channel number that had been
selected.)
Displays the current Memory Chan-
nel number.
The * indicator is ON when the
Memory channel will be skipped dur-
ing Memory Channel Scan.
| A common indicator |
ABC
ON when the A.B.C. (Automatic
Band Change) function is ON.
| The SUB band indicators |
Oe ee
Displays the receive frequency.
"S tomanmnifti-<————Indicates relative signal strenght dur-
' ing reception.
ON whenever the squelch is ON.
@ CTCSS
(TM-721A only)
MUTE
ON when the CTCSS function is ac-
tive.
ON when the volume of the SUB
band is reduced.
13