Tire Pressure Monitoring System (Tpms); 僅 Tire Pressure Monitoring System (Tpms) Malfunction - Kia Niro Plus DE 2022 Owner's Manual

What to do in an emergency
僅 Inflate the tires to the specified pres-
sure.
僅 Replace the underinflated tire with a
spare tire if this is not possible.
Tire Pressure Monitoring System
(TPMS) malfunction indicator
Conditions
僅 Blinks for approximately 1 minute
- When there is a problem with the
Tire Pressure Monitoring System.
Contact a professional workshop or seek
other qualified assistance. Kia recom-
mends to call an authorized Kia dealer/
service partner.
CAUTION
僅 The TPMS malfunction indicator may
blink for approximately 1 minute and
then remain continuously appeared if
the vehicle is moving around electric
power supply cables or radios trans-
mitter such as at police stations, gov-
ernment and public offices,
broadcasting stations, military instal-
lations, airports, or transmitting tow-
ers, etc. This can interfere with normal
operation of the Tire Pressure Moni-
toring System (TPMS).
僅 The TPMS malfunction indicator may
blink for approximately 1 minute and
then remain continuously appeared if
snow chains are used or some sepa-
rate electronic devices such as note-
book computer, mobile charger,
remote starter or navigation etc., are
used in the vehicle.
This can interfere with normal opera-
tion of the Tire Pressure Monitoring
System (TPMS).

Tire Pressure Monitoring System (TPMS)

NOTICE
If there is a malfunction with the TPMS,
the low tire pressure position telltale will
not be displayed even though the vehi-
cle has an underinflated tire.
Changing a tire equipped with
Tire Pressure Monitoring System
(TPMS)
Contact a professional workshop or seek
other qualified assistance. Kia recom-
mends to call an authorized Kia dealer/
service partner.
INFORMATION
You may not be able to identify a low tire
by simply looking at it. Always use a
good quality tire pressure gauge to mea-
sure the tire's inflation pressure. Note
that a tire that is hot (from being driven)
will have a higher pressure measure-
ment than a tire that is cold (from sitting
stationary for at least 3 hours and driven
less than 1 mile (1.6 km) during that 3
hour period).
Allow the tire to cool before measuring
the inflation pressure. Always be sure
the tire is cold before inflating to the rec-
ommended pressure.
A cold tire means the vehicle has been
sitting for 3 hours and driven for less
than 1 mile (1.6 km) in that 3 hour period.
7
7 7