Chassis Block-1 - Sony HT-ST5000 Service Manual

2-9.

CHASSIS BLOCK-1

• Continued on 2-10 (page 20).
WLAN/BT combo card cable
wiring stopper
Bend.
DSP
board
Lock.
claw
cable clamper
4 Draw the WLAN/BT combo
card cable out of the cable
clamper.
right side
3 Unlock the
cable clamper.
5 Draw the CHUKEI-WIRE board
cable out of the cable clamper.
7 CHUKEI-WIRE board cable
connector (CN1102)
6 CHUKEI-WIRE board cable
connector (CN1103)
claw
Lock.
cable clamper
wiring stopper
CHUKEI-WIRE board cable
wiring stopper
top side
cable clamper
B
A
2 Remove the wire
from the clamp.
top side
cable clamper
wiring stopper
DSP board
center speaker
connection cable
2 Remove the wire
from the clamp.
3 Unlock the bottom
cable clamper. side
Wrap the two cables around.
1 saranet
A cushion
B
bottom side
Note: Lay a soft piece of cloth
Bend.
HT-ST5000
front R-ch speaker
connection cable
saranet
AMP board
cushion
top side
left side
under the unit to avoid
damaging the grille assy.
19