TP-Link RE505X User Manual page 28

Chapter 5
5. Click Save.
• To enable or disable the extended network:
1. Go to Settings > Wireless
2. Extended networks are enabled by default. If you want to disable the wireless function
of a certain band, just clear the
of this band will be invalid.
3. Click Save.
• To change the wireless network name (SSID):
1. Go to Settings > Wireless
2. Create a new SSID in
case-sensitive.
3. Click Save.
Note:
If you have changed the wireless settings via a wireless device, you will be disconnected after the settings are applied.
Please write down the new SSID for future use.
• To change the security of the extended network:
1. Go to Settings > Wireless
2. Set the Security mode of your extended network.
> Extended Network.
Enable checkbox. In this case, all the wireless settings
> Extended Network.
Extended 2.4GHz SSID
> Extended Network.
Customize Your Network
or click Copy Host SSID. The value is
25