To Start The Program; To Cancel The Program Or Reselect The Options; End Of The Program; Reload In Process - Philco PLDI 148 AJW steam Owner's Manual

To Start the Program

After you have selected your options and placed detergent with in the detergent dispenser, turn on the water
tap and press the "Start/Pause" button. The screen will display the current program progression with icons
from left to right. It also displays the remaining program time.

To Cancel the Program or Reselect the Options

1. Rotate the program to "Off" for 3 seconds to turn off the machine.
2. Select the new program and options.
3. Press "Start/Pause" button to turn on the machine without adding any extra detergent.

End of the Program

The washing machine shows "END" at the end of the program, when the door is unlocked. If the knob is turned
to "Off", the power will be cut off. If there is no button or knob operation within 2 minutes, the program will
automatically power off.

Reload in Process

If you want to reload clothes in the process of washing, please press "Start/Pause" button.
• f reload icon light up, the door can be opened in the process, remaining time and the Door Lock icon in
display will flash. Then the Door Lock icon will go out, and the door can be opened.
• f reload icon doesn't light up, the Door Lock icon doesn't flash, it indicates that current temperature is
over 50 C or you have passed the time for reloading in the process, namely no clothes allowed to load into
the machine.

Programme Instructions

1. The eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable about
40°C to 60°C, together in the same cycle, and that this programme is used to assess the compliance with the
EU ecodesign legislation.
2. The power consumption of the off-mode is 0.49W.
3. The most efficient programmes in terms of energy consumption are generally those that perform at lower
temperatures and longer duration.
4. Loading the household washing machine up to the capacity indicated by the manufacturer for the
respective programmes will contribute to energy and water savings.
5. Correct use of detergent, softeners and other additives. Do not apply excessive detergent. This may affect
the washing results adversely.
6. Periodic cleaning, including optimal frequency, and limescale prevention and procedure.
7. Noise and remaining moisture content are influenced by the spinning speed: the higher the spinning
speed in the spinning phase, the higher the noise and the lower the remaining moisture content.
8. The product information and QR code are reflected in the energy consumption label, the product
registration information can be obtained by scanning the QR code.
9. The information of standard programmes.
EN - 30
Copyright © 2020, Fast ČR, a. s. Revision 08/2023