Step 9 - Position Dishwasher Under Countertop; Step 10 - Level Dishwasher - GE GLDT696D00SS Installation Instructions Manual

Installation Instructions
STEP 9 - POSITION DISHWASHER UNDER COUNTERTOP
*Check to be sure that wires are secure under the
dishwasher and not pinched or in contact with door
springs or other dishwasher components.
TIP: Check tub insulation blanket, if equipped. It should
be positioned so it is not bunched up or interfering with
door springs. Check by opening and closing the door.
#Dishwasher door should be flush with cabinet doors.
Be careful not to dent front panel with knees or damage
countertop or cabinets with dishwasher parts.
Reposition Dishwasher
by Grasping Both
A Sides With Hands
Do Not Push Against
Front Door Panel With
Knee. Damage to The
Door Panel Will Occur.
Figure 15
STEP 10 - LEVEL DISHWASHER
IMPORTANT ™ Dishwasher Must
be level for proper dish rack operation and wash
performance.
Place level on
door and rack
track inside the
tub as shown to
check that the
dishwasher is
level.
Figure 16
¢ Level the dishwasher
by adjusting the |
four leveling legs
individually.
ar
Turn Legs
to Adjust
TIP: Pull lower rack out, about halfway . Check to
be sure the rack does not roll forward or back into
dishwasher . If the rack rolls in either direction, the
dishwasher must be leveled again.
elf door hits the tub, the dishwasher is not installed
correctly . Adjust leveling legs to align door to tub.