Table of Contents
Advertisement
Installaion
1.
Turn off your computer and unplug your computer's power cord.
2.
Connect the signal cable either HDMI, or Type C, or DP, input socket
of the monitor, and HDMI, or Type C, or DP, onput socket to graphics
card on the computer.
3.
To use the RJ45 port: After USB upstream connection is established
between the computer and the monitor, use a RJ45 cable to connect
the monitor with an AP/ router. You can now access the Internet.
4.
Insert the monitor power cable into the power port at the back of the
monitor.
5.
Plug the power cords of your computer and your monitor into a
nearby electrical outlet.
6.
To use the USB upstream/downstream function:
•
Upstream: Use an USB Type-C cable and plug on end of the Type-c
connector to the monitor's USB 3.2 Gen1 Type-C port as
upstream and the other end to your computer's USB Type-C jack.
Or use an USB Type-C to Type-A cable and plug the Type-C
connector to the the monitor's USB 3.2 Gen1 Type-C port as
upstream and the Type-A connector to your computer's USB
Type-A jack. Make sure your computer is installed with the latest
Windows10/Windows11 operating system.
•
Downstream: Use an USB cable to connect your device with the
monitor's USB Type A jack.
1-4
Chapter 1: Product Introduction
Advertisement
Table of Contents
