Asus VA27EQSB Series User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Monitor
  5. VA27EQSB Series
  6. User manual

Asus VA27EQSB Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VA27EQSB Series
LCD Monitor
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Asus VA27EQSB Series

Summary of Contents for Asus VA27EQSB Series

  • Page 1 VA27EQSB Series LCD Monitor User Guide...

  • Page 2: Table Of Contents

    Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.

  • Page 3: Tco Certified

    TCO certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories.

  • Page 4: Notices

    Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. NOTE: This monitor is ENERGY STAR certified. This product qualifies for ENERGY STAR in the factory default setting which can be restored by “Factory Reset” function in the OSD menu. Changing the factory default settings or enabling other features may increase power consumption that could exceed the ENERGY STAR...
  • Page 5 Declaration of Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards published under Directives of Official Journal of the European Union. WEEE Symbol Statement This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. AEEE yönetmeliğine uygundur...
  • Page 6 Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. • Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided. • The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. • Use the appropriate power plug which complies with your local power standard. • Do not overload power strips and extension cords. Overloading can result in fire or electric shock. • Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface. • Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges. •...
  • Page 7 WARNING Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures. Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. Stability Hazard. The product may fall, causing serious personal injury or death. To prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions. A product may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such ALWAYS use cabinets or stands or installation methods recommended by the manufacturer of the product set. ALWAYS use furniture that can safely support the product. ALWAYS ensure the product is not overhanging the edge of the supporting furniture. ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls. ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or grabbed. NEVER place a product in an unstable location. NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support. NEVER place the product on cloth or other materials that may be located between the product and supporting furniture. NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed. If the existing product is going to be retained and relocated, the same considerations as above should be applied.
  • Page 8 Excessive sound pressure from earphones and headphones can cause hearing loss. Adjustment of the equalizer to maximum increases the earphones and headphones output voltage and therefore the sound pressure level. Restriction on Hazardous Substances statement (India) This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of Lead, Mercury, Hexavalent Chromium, polybrominated biphenyls(PBBs) and polybrominated diphenyl ethers(PBDEs) in concentration exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except of exemptions listed in Schedule 2 of the Rule. viii...

  • Page 9: Care & Cleaning

    Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner. • Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock. The following symptoms are normal with the monitor: • The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours. • When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself! Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task.

  • Page 10: Takeback Services

    Where to find more information Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package. Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detail recycling information in different region. Product information for EU energy label...

  • Page 11: Welcome

    Welcome! ® Thank you for purchasing the ASUS LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings you! Package contents Check your package for the following items: LCD Monitor Monitor Base Monitor Column Quick Start Guide Warranty Card 1x Power Cord * 1x HDMI Cable (optional) * 1x VGA Cable (optional) * 1x DisplayPort Cable (optional) * 1x Audio Cable (optional) * 1x USB Cable (optional) * 4x Screws (Optional) 1x L-shaped Screwdriver (optional) • If any of the above items is damaged or missing, contact your retailer immediately. • * Also the Replaceable parts required by the TCO Certified. ASUS LCD Monitor VA27EQSB Series...

  • Page 12: Assembling The Monitor

    Assembling the monitor To assemble the monitor Place the display on a cloth on the table, Then attach the base to the arm and fix with the screw to join them tightly. You can easily tighten the screw by fingers. Adjust the monitor to the angle that is most comfortable for you. *Base screw size: M6 x 13.7mm Chapter 1: Product Introduction...

  • Page 13: Connect Cables

    Connect cables 1.4.1 Rear of the LCD monitor HDMI AC-IN Port DisplayPort Port HDMI Port VGA Port Audio in Audio out USB3.2 Gen1 Type-B Port USB3.2 Gen1 Type-A Port USB3.2 Gen1 Type-A Port 10. Kensington Lock ASUS LCD Monitor VA27EQSB Series...

  • Page 14: Installaion

    1.4.2 Installaion Turn off your computer and unplug your computer's power cord. Connect the signal cable to the HDMI (optional) and /or VGA (optional) and /or DP (optional) input socket of the monitor, and the HDMI (optional) and /or VGA (optional) and /or DP (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector. Optional: Connect the audio input socket (AUDIO IN) of the LCD monitor and the line-out port on the computer with the audio cable. Insert the monitor power cable into the power port at the back of the monitor. Plug the power cords of your computer and your monitor into a nearby electrical outlet. HDMI DisplayPort D-SUB Chapter 1: Product Introduction...

  • Page 15: Six Sides Figure

    • POWER CORD specifications refer to page v. • For the installation of replaceable parts, please refer to the above installation instructions. • Users may go to the local service network to replace /purchase the qualified replaceable parts. • For local service centers and service contacts, please refer to https://www.asus.com/support 1.4.3 Six sides figure ASUS VA27EQSB Series UNIT:mm ASUS LCD Monitor VA27EQSB Series...

  • Page 16: Monitor Introduction

    Monitor introduction 1.5.1 Using the Controls button Use the control button on the back of the monitor to adjust the image settings. Menu Button / Close: • Press this Button enter the OSD menu. • Exit the OSD menu. • Return to previous menu. • Key Locked Hot key(*Note1) Close / Return Button: • Exit the OSD menu. • Enter/select the icon (function) highlighted while the OSD is activated. Input source hot key/Increase value: • Add or Increase value • Input source hot key Brightness hot key/Decrease value: • Next Item or Decrease value • Brightness hot key Power Button: • Power on/off monitor when monitor is power off/on. Chapter 1: Product Introduction...

  • Page 17: Detaching The Arm/Stand (For Vesa Wall Mount)

    Detaching the arm/stand (for VESA wall mount) The detachable stand of this monitor is specially designed for VESA wall mount. To detach the arm/stand Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table. Remove the four (4) screws securing the arm to the rear of the monitor. Detach the stand (arm and base) from the monitor. • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • The VESA wall mount kit ( 100 x 100 mm) is purchased separately. • Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg (Screw size: M4 x 10 mm). ASUS LCD Monitor VA27EQSB Series...

  • Page 18: Adjusting The Monitor

    Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle from +35˚ to -5˚ and You can also adjust the monitor’s height within +/- 15cm. Before rotating the display,lift it to the top position and then push it back to the utmost degree. Rotate clockwise or counter-clockwise until the monitor stops at ±90°. -5° ~ +35° ±15cm 180° 180° 0° (Tilt) (Swivel) (Height adjustment) -5° ~ +35° 0° -90° 0° 90° It is normal that the monitor slightly shakes while you adjust the viewing angle. Chapter 2: Setup...

  • Page 19: Osd (On-Screen Display) Menu

    Mode Scenery Mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode Press the MENU button to activate the OSD menu. Press the  and  buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. To select the highlighted item on the menu press the Center key. Press the  and  buttons to select the desired parameter. Press the key to enter the slide bar and then use the  or  buttons, according to the indicators on the menu, to make your changes. ASUS LCD Monitor VA27EQSB Series...

  • Page 20: Osd Function Introduction

    3.1.2 OSD Function Introduction Splendid This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode. ASUS VA27E Splendid Standard Mode VGA 1920 x 1080 @ 60Hz Standard Mode sRGB Mode Scenery Mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode • Standard Mode: This is the best choice for document editing with SPLENDID™ Video Intelligence Technology.
  • Page 21 Standard Mode will be automatically imported. Besides maximum level, the brightness is user-configurable. Maximum is the optimized setting. It is compliance with TUV low blue light certification*. The brightness function is not user configurable. • When the user adjusts blue light filter bar to maximum level. • *When color augmentation is in default value (50). Please refer to the following to alleviate eye strains: • Users should take some time away from the display if working for long hours. It is advised to take short breaks (at least 5 mins) after around 1 hour of continuous working at the computer. Taking short and frequent breaks is more effective than a single longer break. • To minimize eye strain and dryness in your eyes, users should rest the eye periodically by focusing on objects that are far away. • Eye exercises can help to reduces eye strain. Repeat these exercises often. If eye strain continues please consult a physician. Eye exercises: (1) Repeating look up and down (2) Slowly roll your eyes (3) Move your eyes diagonal. • High energy blue light may lead to eye strain and AMD (Age-Related Macular Degeneration). Blue light filter to reduce 70% (max.) harmful blue light to avoiding CVS (Computer Vision Syndrome). • Rest Reminder: This function provides you a rest reminder according to how long you set for your working time. For example, a user sets 60 minutes working time and there will be a pop up reminder appeared on the upper left corner of the monitor for 5 seconds. Press any key to make this reminder OSD disappeared. ASUS LCD Monitor VA27EQSB Series...
  • Page 22 • When this function is enable, the following functions are not available: Splendid Demo Mode, GamePlus and QuickFit. • Color Augmentation: The adjusting range of color enhancement is from 0 to 100. • This function is not available in sRGB mode under Splendid. • This function is not available when Reddish or Yellowish is selected in the Skin Tone menu. Chapter 3: General Instruction...
  • Page 23 ASUS VA27E Color Standard Mode VGA 1920 x 1080 @ 60Hz Brightness Contrast Saturation Color Temp. Skin Tone • Brightness: The adjusting range is from 0 to 100. • Contrast: The adjusting range is from 0 to 100. • Saturation: The adjusting range is from 0 to 100. • Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode. • Skin Tone: Contains three color modes including Reddish, Natural, and Yellowish. • In the User Mode, colors of R (Red), G (Green), and B (Blue) are user- configurable; the adjusting range is from 0 ~ 100. ASUS LCD Monitor VA27EQSB Series...
  • Page 24 Image You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, ASCR, Adaptive-Sync (HDMI and DisplayPort only), Position (VGA only), Focus (VGA only), and Auto Adjust (VGA only), from this main function. ASUS VA27E Image Standard Mode VGA 1920 x 1080 @ 60Hz Sharpness Trace Free Aspect Control VividPixel ASCR Adaptive-Sync Position More ASUS VA27E Image Standard Mode VGA 1920 x 1080 @ 60Hz Back Focus Auto Adjust •...
  • Page 25 0 to 100 (Only available for VGA input). • Auto Adjust.: Automatically adjust the image to its optimized position, clock, and phase. (Only available for VGA input.) • 4:3 is only available when input source is in 4:3 format。 • Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the screen shows horizontal disturbances. • Clock (pixel frequency) controls the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the image is not proportional. Input Select Select the input source from VGA, HDMI, DisplayPort input signal. ASUS VA27E Input Select Standard Mode VGA 1920 x 1080 @ 60Hz HDMI DisplayPort ASUS LCD Monitor VA27EQSB Series...
  • Page 26 System Setup Adjusts the system configuration. System Setup ASUS VA27E Standard Mode VGA 1920 x 1080 @ 60Hz Splendid Demo Mode Volume GamePlus QuickFit ECO Mode USB Hub OSD Setup More ASUS VA27E System Setup Standard Mode VGA 1920 x 1080 @ 60Hz...
  • Page 27 GamePlus main menu GamePlus-Crosshair GamePlus GamePlus Crosshair (Practice Mode) Timer FPS Counter Display Alignment GamePlus-Timer GamePlus -FPS GamePlus GamePlus • QuickFit: contains three patterns: (1) Grid (2) Paper size (3) Photo size. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel. Alignment Grid 1 Alignment Grid 2 ASUS LCD Monitor VA27EQSB Series...
  • Page 28 Paper size: Provides users to view their documents in real size on the screen. Letter Letter EXIT EXIT Photo size: Provides photographers and other users to accurately view and edit their photos in real size on the screen. 8x10 • ECO Mode: Activate the ecology mode for power saving. • USB Hub: Turn On/Off USB charging function during the standby mode. • OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen. • More: Return the next page of System Setting. • Back: Return the previous page of System Setting. • Language: Select OSD language. The selections are: English, French, German, Spanish, Italian, Dutch, Russian, Poland, Czech, Croacia, Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai, Indonesian, Ukrainian.
  • Page 29 “Brightness”, “Contrast”, “Input Select”, “Color Temp.”, “Volume ”, “QuickFit”, “GamePlus”, “Rest Reminder”, “Color Augmentation”, and set as shortcut key. The default setting is Input Select. Shortcut 2: User can select from “Blue Light Filter” “Splendid”, • “Brightness”, “Contrast”, “Input Select”, “Color Temp.”, “Volume ”, “QuickFit”, “GamePlus”, “Rest Reminder”, “Color Augmentation”, and set as shortcut key. The default setting is Brightness. ASUS LCD Monitor VA27EQSB Series 3-11...

  • Page 30: Specifications

    Specifications Model VA27EQSB 27”W Panel Size Max. Resolution 1920x1080 Brightness (Typ.) 300cd/m Contrast Ratio (Typ.) 1000:1 Contrast Ratio (Max.) 100,000,000:1(with ASCR on) Viewing Angle (CR>10) 178°(V) /178°(H) Display Colors 16.7 M(6bit+FRC) Response Time 5ms (G To G ) Satellite Speaker 2W*2 Stereo, RMS. HDMI input DP input D-Sub input USB input Earphone Jack Audio Line-in < 13.1W Power ON Consumption Note *Based on Energy Star 8.0 standard Chassis Colors Black < 0.5W Power saving mode < 0.3W under ERP Lot5. Power off mode Tilt -5° ~ +35°...
  • Page 31 Net Weight (Esti.) 6.0 kg Gross Weight (Esti.) 8.4 kg Voltage Rating AC 100~240V(Built-in) TCO9.0, UL, FCC, ICES-3, EPEAT Bronze, CB, CE, WEEE, ErP, ISO 9241-307, UkrSEPRO, EAC(CU), CCC, Regulation Approvals BSMI, RCM, MEPS, KCC, KC, e-Standby, VCCI, J-Moss, PC Recycle, PSE, RoHS, Windows 7 & 10 & 11 WHQL, Blue light filter, Flicker free, Energy Star 8.0, CEC ASUS LCD Monitor VA27EQSB Series 3-13...

  • Page 32: Troubleshooting (Faq)

    Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. • Check Power Indicator function in main menu OSD. Select “ON” to turn on power LED. The power LED lights amber and • Check if the monitor and the computer are in the there is no screen image ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure none of the pins are bent. • Connect the computer with another available monitor to check if the computer is properly working. Screen image is too light or dark • Adjust the Contrast and Brightness settings via OSD. Screen image bounces or a wave • Make sure the signal cable is properly connected to pattern is present in the image the monitor and the computer.

  • Page 33: Supported Timing List

    55.469kHz 1680x1050(RB) 60Hz 64.674kHz 1920x1080 60Hz 66.587kHz SD/HD Timings (HDMI input only) HDMI 1.3,CEA-861B Formats, SD/HD Supported Primary Timings of (HDMI input only) Resolution Refresh Rate Horizontal Frequency 640x480P 59.94 / 60Hz 31.469 / 31.5kHz 720x480P 59.94 / 60Hz 31.469 / 31.5kHz ASUS LCD Monitor VA27EQSB Series 3-15...
  • Page 34 720x576P 50Hz 31.25kHz 1280x720P 50Hz 37.5kHz 1280x720P 59.94 / 60Hz 44.955 /45kHz 1920x1080P 50Hz 28.125kHz 1920x1080P 59.94 / 60Hz 33.716 / 33.75kHz HDMI 1.3,CEA-861B Formats, SD/HD Supported Optional Timings of (HDMI input only) Resolution Refresh Rate Horizontal Frequency 1440x480P 59.94 / 60Hz 31.469 / 31.5kHz 1440x576P 50Hz 31.25kHz 1920x1080P 50Hz 56.25kHz 1920x1080P 59.94 / 60Hz 67.433 / 67.5kHz...

Table of Contents