Rear view
Ethernet interfaces LAN0 through LAN2
OPT interface
WAN interfaces 1 and 2
Power input
RESET button
Side panels
Computer lock slot
Antennas (wireless model only)
22
The Ethernet interfaces with the marks LAN0 through
LAN2 are for the trusted network.
This Ethernet interface is for the optional network.
The WAN1 and WAN2 interfaces are for external
networks.
A 12V/1.2A power supply is included with your Firebox
X Edge e-Series. Connect the AC adapter to the Firebox
X Edge and to a power source. The power supply tip is
plus (+) polarity.
To reset the Firebox X Edge e-Series, use the procedure
in "Factory Default Settings" on page 37.
The two side panels of the Firebox X Edge e-Series
have a slot for a computer lock.
The two side panels of the Firebox X Edge e-Series
Wireless have wireless antennas.
Hardware Guide