HP 9000 300 Series Service Training page 56

t$cd .. /Crtadjust
'./adjust
0) exit utility
1) 2623A, 2393A, or 2397A graphics terminal
2) 98542, 98543, (and 318 built-in mono) medium-res
3) 98544, 98545, and 98547 high-res (monochrome or color)
4) 98548, 98549, 98550 graphics processor boards
5) 98700, graphics processor
6) 98710 graphics accelerator for 98700
7) 98720 graphics processor
8) 98730 Turbo Srx graphics processor
9) 98705 graphics processor
10) 98735 graphics processor
11) A1499A graphics processor
If you want to test a device other than the one you are presently using,
ensure no process is waiting for input from that device. You should not
test a monitor/terminal currently being used by another user.
Enter the number corresponding to the output device.
11
Enter the device file (typically /dev/crt) for the monitor
interface, that you want to send the alignment pattern to
(If device file is unknown, BREAK from this program and do
an
'11
/dev
I
more' to determine device file.)
Enter device file, then press RETURN (form /dev/nnn)
/dev/crt.
Compiling test program
PLEASE WAIT -- It takes about 30 seconds to compile
Troubleshooting 4·7