SAFETY HINTS - Read these instructions - Keep these instructions - Heed all warnings - Follow these instructions Caution: To reduce the risk of electrical shock, do not remove the cover. Or expose this appliance to rain or moisture. No user serviceable parts insi- de;...
Page 5
If you keep to the guidelines set out in this manual, you will soon be able to appreciate the quality of this new Warwick amplifier. Please keep this instruction booklet handy in case you need to consult it again. Please send the PASSPORT to the address indicated therein.
PROTECTIVE CIRCUITS Your new Warwick amplifier is equipped with a series of circuits to prevent it from destruction in case of inadequate ope- rating conditions: Power-up delay: When the unit is switched on, the SPEAKER OUT sockets are activated with a slight delay to protect the loudspeakers.
2ND STAGE Switch adds one output stage tube into the circuit. This feature offers the choice between a so called hybrid amplifier (tube preamp with transistor power amp) and the sound of an all tube amplifier head. MASTER Control determines the mains level.
Page 8
0dB, 600 ohms return 0dB, 10k ohms Groundlift, DI pre / post jack (TubePath 5.1 only) and lockable coaxial 500 W / 4 ohms (TubePath 5.1) 1.000 W / 4 ohms (TubePath 10.1) < 0.1 % 17.7 kg (TubePath 5.1) 21.5 kg (TubePath 10.1)