Table of Contents
Advertisement
Layout of the brewer
Operation and service
Brew basket sensor
(internal)
LED Status indicator bar
Touchscreen
(for brewer operation)
Brew basket
Hot Water Service Faucet
(not on all models)
Dispenser Locator
3 gallon/1½ gallon half batch
Main power switch
Starting The Brew
Twin Brewer ready to brew.
Batch one-top left brew position selected
Go to fetco.com for the latest versions of all information
Operation
1. Turn the power switch "ON". (Twin Shown)
2. Prepare a brew basket with the correct size filter and appropriate
amount of coffee. (6-12 ounces or 170-340 grams for 1½ gal/6
liters)
3. Slide the brew basket completely into the rails.
4. Place a clean, empty, preheated dispenser under the brew
basket.
5. Select a batch & touch the corresponding BREW icon
(Batch #1 selected in illustration), then press "START"
6. -STOP icon will illuminate,
-Countdown time will display, with proportional graphic circle icon
-LED indicator will pulse.
-All other BREW icons for that brew head will be hidden.
....-Opposite side BREW icons on dual brewer remain active
7. When the brew cycle is finished,
-Spray icon will extinguish and the BREW circular icon will
remain.
This indicates that coffee may still be dripping from the brew basket
For safety- do not remove brew basket until drip-out is complete.
Layout for installing brewer (back side)
.
Page 4
P195
Service
Brewing in process
Batch one selected
FETCO
CBS-2261, CBS-2262
October 2023
Advertisement
Table of Contents
