Table of Contents
Advertisement
7.1 Tools required
Product installation requires the following tools:
1.
Power drill
2. 3 mm drill bit
3. 10 mm drill bit
4. Adhesive tape
5. 13 mm socket
6. Torque wrench
Mounting
7.2 Mounting pre-requisite: "breather" holes
The base of the unit features a "breather", a series of small holes which allow
air to circulate between the underside of the unit and the mounting surface.
1.
Location of "breather" holes.
Ensure that the breather is not blocked in any way. Examples of obstacles
to airflow include sealant and paint.
If necessary, use additional washers to allow a small gap between the
underside of the unit and the mounting surface, for airflow.
7.3 Mounting the scanner
Use a mounting location that:
37
Advertisement
Table of Contents
Troubleshooting
