Chassis Removal; Front Panel Removal; Operating Modes - Sharp SC-103H Service Manual

DISASSEMBLY
CHASSIS REMOVAL (Refer to Figure 1)
1. Disconnect all leads connected to the back of the set.
2. Remove 7 screws (1) retaining the chassis (2).
3. Gently pull forward the panel (3) and chassis from the
cabinet (4).
FRONT PANEL REMOVAL
_ 1. Remove the cabinet as described in Chassis Removal.
2. Remove 8 knobs (5,6,7,8) from front of the panel.
3, Remove 9 screws (9) retaining the front panel.
4. Gently pull out the panel while holding both sides.
Figure 2 DIAL CORD STRINGING
OPERATING MODES
1. STOP Mode
YS LY @
ots —
: ff yO ice
g zor, 4
Figure 3