Table of Contents
Advertisement
Additional Information
This section contains information that will help you if you have problems with your player. It also contains
maintenance information and glossary.
Troubleshooting
Check the following before requesting service.
Symptom
Point to check
No power
AC Power cable properly connected?
PLAY (>) button or Number keys
do not produce playback.
Disc inserted?
Disc properly seated?
Label side of the CD facing upward?
> indicator is lit, but there is no
picture or sound.
TV or monitor switched on?
¢ TV properly connected to player?
The input selector on TV set to "Video"?
Poor picture or sound quality
TV properly connected?
Any source of noise nearby?
Disc dirty or scratched?
Any condensation on player objective lens?
No sound
TV properly connected to player?
* Volume control on TV, monitor, or amplifier high enough?
¢ Playback at normal speed? (The player produces sound only during normal
speed playback.)
Remote Commander does not
operate.
Picture distorted during scan.
No sound from microphone
Shuffle, Delete Shuffle or Auto
Program does not function on
an LD.
Batteries correctly inserted?
Batteries weak?
Any obstacles between the Remote Commander and the Sensor on the player?
The Remote Commander is pointed at the sensor on the player?
Some distortion in the lower part of the picture is normal — even for CAV discs.
MIC LEVEL control is MIN?
Microphone switch is ON?
Connected to amplifier with a Fiber Optical Cable?
(LD) QUICK START indicator is off?
The AV Calendar appears?
The LD contains TOC data?
Sound is distorted.
ATT (Attenuator) switch is ON?
L
44
Additional Information
Advertisement
Table of Contents
