Advertisement
Stereo system using CLD-2080 and AV television
|
When using
an AV amplifier
Audio cord
To AUDIO OUT
jacks
ee:
==
To VIDEO OUT jack
To VIDEO OUT jack
all other connections have been
completed.
When the power cord is connected to an AC
outlet, power is supplied to the unit's internal
memory (such as last memory) even when
POWER switch is STANDBY. Therefore, be sure
to connect the power cord directly to 4 wall
outlet. If the power cord is connected to an
outiet'such as a switched outlet on an amplifier,
the various memory contents will be erased
whenever the amplifier's power switch is turned
off.
Video cord
Television
Making connections
@ Connect VIDEO OUT jack of this unit to the video input
@® Connect the power cord to an AC wall outlet.
jack of the AV television (or monitor TV).
@
System control is possible when this unit is combined
@) Connect AUDIO OUT jacks of this unit to the appropriate
in @ system with other Pioneer components such as a
audio input jacks (AUX, CD, VDP, LD, VCR, etc.) of your
AV television or an AV control center.
(See page 12
stereo amplifier.
(However, be careful not to connect
and 13.}
to the amplifier's PHONO jacks.)
10
<VRB1029>
En
Advertisement
