Advertisement
Deciding the shutter speed
(1)
Set
the
desired aperture
stop
.
Aim
your
camera
toward the object to be photo-
graphed
.
Turn the shutter
speed
dial and align the
lens aperture reading
with
the
needle
.
Be
sure
to set the
shutter
dial to a click stop.
• When reading the light meter, take care
not to cover the photo-cell with the hand
.
• The reading of the
aperture stop
is
carried
out along the guide
line.
Deciding the Aperture (2)
Set the
desired
shutter
speed as recommended in
the film instruction.
Point
the camera at the object
to be photographed. Read
the aperture stop indicat-
ed by the exposure meter
needle and set the auto-
matic pre-set aperture ring
accordingly
.
Be sure to
read
corresponding posi-
tion of the zebra pattern
edges
.
• Positions between numbers on the shutter
speed
dial cannot be used, but positions
between numbers on the
aperture
ring
can be used.
Consequently, in the strict
sense
of correct exposure, it
is
strongly
recommended
to
set the
shutter
speed
first and then adjust the
lens aperture
accordingly.
10
Advertisement
