Setting Up; Choosing Tile Power Sources; Selecting The Audio Emphasis - Sony CFD-S23 Operating Instructions Manual

Setting Up
Choosing the
power sources
You can use the AC power or
batteries as a power source.
Tip
Preset memories for
clock/timer/radlo are
saved for about 60
minutes even after you
disconnect the AC
power cord or remove
die batteries.
If you want to clear the
momoriesatonoe,
E
ress RESET In the
attery compartment,
Note
CFD-S33 <m/y:
Whsi you Operate the
player with the
batteries, you cannot
tumonlhepbyer
using the remote.
Tip
Replace the batteries
when the OPR/BATT
indicator dims or when
the player stops
operating. Replace all
the batteries with new
ones. Before you
refdace the batteries, be
sure to take out the CD
horn the player.
22 I Settingup
D Connecting the AC power cord
hteerf one end of the supplied AC power cord to the
AC IN sock^ located at rear of the player, and the
other end to die wall outlet
B Inserting batteries into the remote
{CFD-S33 only)
Replacing batteries
With normal use, the batteries should last for about six
months. When the remote no longer operates the
player, replace all the batteries with new ones.
B Using the player on batteries
Insert six size D (R20) batteries (not supplied) into the
battery compartment.
To use (he player on batteries, disconnect the AC
power cord from the player.
Selecting the
audio emphasis
(Sound Mode^EGA BASS)
You can adjust the audio emphasis of the
sound you are listening to.
Selecting the sound characteristic
Press SOUND to select the audio emphasis
3
ml want
Chewse To get
ROCK powetful, clean sounds,
emphasizing low and high range
audio
VOCAL the presence of vocals, stressing
middle range audio
UVK percussive sounds, emphasizing
bass audio
POP l^bbiightaoundsemphasiring
high and middle range audio
OFF the whole dynamic range for music
such as classical musk
Reinfercing the bass sound
Press MEGA BASS.
'^MEGA BASS^ appears in the display. To return to
normal sound, press the button again.
MEGA BASS SOUND
Setting U