BenQ DesignVue PD Series User Manual page 73

Item
HDR Demo (Works only if the input content is HDR-compatible)
(PD2720U / When the function is activated, all color modes are
PD3220U only) available for a comparison between HDR and non-HDR
image representation. See
HDR function availability (PD2720U / PD3220U only)
on page 75
Auto Switch Once enabled, the specific port will be in the input auto
select loop. Otherwise, it can only be selected by input
select or by hot key.
Ergonomics Smart
Reminder
Time
Interval
(min.)
Duration
(sec.)
Power Awake If this function is disabled, the Thunderbolt™ 3 / USB
(models with ports are not supplied with power while the monitor is
Thunderbolt™) in standby mode.
To keep supplying power to the Thunderbolt™ 3 / USB
ports in monitor's standby mode, change the setting to
ON.
USB-C Sets the refresh rate of the input video via USB-C™
Configuration port. The USB transmission speed changes
accordingly due to USB-C™ technology limitation. See
(PD3420Q)
Options for data transfer via USB-C™ (PD3420Q only)
on page 76
USB-C Awake If this function is disabled, the USB-C™ port is not
(PD3420Q) supplied with power while the monitor is in standby
mode.
To keep supplying power to the USB-C™ port in
monitor's standby mode, change the setting to ON.
for more information.
If this function is activated and a non-HDR mode is selected,
the input HDR content may be represented inappropriately.
Available only when KVM Switch > Video Input is set to
None.
Decides to display the pop-up message
that reminds you to rest your eyes.
Sets the interval of the reminder
message.
Sets the time the reminder message
lasts on the screen.
for more information.
Function
HDR Demo options and
73
Range
• ON
• OFF
• DP Auto
Switch
• HDMI Auto
Switch
• ON
• OFF
• 20
• 40
• 60
• 80
• 100
• 5
• 10
• 15
• 20
• 25
• Thunderbolt
3
• USB
• USB 3.1 Gen
1
• USB 2.0
• ON
• OFF