Sony DPP-FP90 Service Manual page 24
Digital photo printer
Hide thumbs
Also See for DPP-FP90:
- Read this first (2 pages) ,
- Manual del instrucción (84 pages) ,
- Operating instructions manual (84 pages)
Table of Contents
Advertisement
4-3-5. ABOUT THE ERROR INDICATION
In this unit, "printer status" and "last 10 error status" can be indicated
and checked in the service mode.
Startup procedure
1.
Start the service mode. (Refer to Section 4-1-1.)
2.
Select "Print Status" using the arrow buttons (f,F) and press
the [ENTER] button.
"Status indication" screen is displayed. The 1/2 page and the
2/2 page are displayed by using the arrow buttons (f, F).
3.
After confirming the error indication, quit the service mode.
(Refer to Section 4-1-1.)
Description of screen
Indication in red:
**Last Status**:
**Current Status**:
Current status
**Error 0**:
Status when the last error occurred
**Error 1**:
Status of error occurred two times
earlier The last ten errors are stored.
**Error 9**:
Status of error occurred ten times
earlier
**Error 0** is displayed on the initial status screen in the past error
status. To display the earlier error history, press the arrow button
(G) and to display the later error history, press the arrow button
(g). The pages can be selected by using the arrow buttons (f, F).
When the arrow button (g) is pressed in the **Error 0** state, **Last
Status** is displayed. In the case that no error occurred in
the past, **Last Status** is displayed on the initial status screen.
Use the arrow button (g) to display **Current Status**.
Ribbon:
Ribbon type
None:
Ribbon is not installed.
Post:
Cartridge for postcard size is inserted.
L:
Cartridge for L size is inserted.
Cleaning:
Cartridge for cleaning is inserted.
Unknown:
Unknown
Tray:
Tray type
Post:
Tray for postcard size is inserted.
L:
Tray for L size is inserted.
None;
Tray is not installed.
DPP-FP90
Status indication
Status of last printing
Card:
King of memory card when making an error
Error:
Error type
No Error:
No error
No Ribbon:
No ribbon
Ribbon End:
Ribbon end
Ribbon Error:
Ribbon error
Paper End:
No paper
Paper Long:
Paper length error (long)
Paper Short:
Paper length error (short)
Paper Exist:
Paper exists
PE Error:
PE sensor error
Head Error:
Head error
MMotor Error:
DC motor error
SMotor Error:
Stepping motor error
Mode Error:
Mode transition error
HeatStrage Error:
Heat storage correction error
Other Error:
Other error
Unknown:
Unknown
MD Status:
Not used
Pass:
Print pass
Feed:
During paper feeding
Y:
During yellow printing
M:
During magenta printing
C:
During cyan printing
Lami:
During laminated paper printing
Unknown:
Unknown
Total Try:
Total count of tried printing
Total Print:
Total count of printing
HEAD A/D:
Thermistor A/D value of head
SupStep:
Count of paper feed step
Progress:
Progress (%) of each color (Y, M, C, L)
during printing
Sensor:
Each sensor value (1 or 0)
R2
R1
R0
RM
T1
T0
PE
CF_VS
Cool down:
Cool down (Decrease the heat temperature)
Paper Sup:
Paper feed
Paper Rev1:
Paper reverse 1
(Reverse paper to the point of PE paper feed
by determining the paper length.)
Paper Rev2:
Paper reverse 2
(Reverse paper after single color printing)
Paper Init0:
Paper initial point 0
Paper Init1:
Paper initial point 1
Print:
Printing
Paper Eject1:
Paper eject 1
(Paper eject at the completion of printing)
Paper Error Eject0:
Error paper eject 0
Paper Error Eject1:
Error paper eject 1
Timeout M0/1:
Return to M0 or M1
Unknown:
Unknown
Mode Pos:
Head position
PR
RS
PF
PU
RL
Unknown:
Unknown
4-8
Advertisement
Table of Contents
Troubleshooting
