Table of Contents
Advertisement
Troubleshooting
If you encounter any trouble to boot you system, follow the procedures accordingly to resolve the
problem.
Тит off the power and unplug the AC power cable, then remove all of
the addon cards and cables, including VGA, IDE, FDD, COM1, COM2
and Printer.
Make sure if the jumper settings for CPU and DRAMs are correct.
Clear CMOS.
Install the VGA card. Then connect your monitor and keyboard.
The problem was probably caused by
power supply or motherboard failure.
Please contact your reseller or (оса!
distributor for repairing.
um on the power, and check if the power supply and СР
No
fan work property.
Yes
Yes
Press СШ, and АН key at the same time, hold them and then
press Del to see if the system reboots.
Yes
During system rebooting, press Del to enter BIOS Setup. Choose "Load
Setup Default".
Tum off the system and re-connect the IDE cable.Chec
if the system can reboot successfully.
No
The problem should be caused by the
IDE cables or HDD itself.
No
it is very possible that your keyboard is
defective.
Yes
Re-install Windows 95, Windows 98 or Windows NT
Advertisement
Table of Contents
