Water Filter; Operation - Vulcan-Hart SCALEBLOCKER SPS600V Installation & Operation Manual

Vulcan sps600v water filters: user guide
Hide thumbs Also See for SCALEBLOCKER SPS600V:
Table of Contents

Advertisement

WATER FILTER

The proper water filter cartridge should already
be installed in the filter housing. Make sure the
filter housing is firmly screwed into the filter
mounting head.
Use the supplied wrench if
necessary.
Turn on the filter water supply valve.
Press the red pressure relief button on top of the
filter mounting head until all air is purged from
the filter.
DIGITAL FLOW METER
Installing Batteries (Fig. 2)
Slide off the cover to the battery housing on top of the flow meter. Install two AAA batteries. Slide
the cover back.
Capacity and Time
Capacity and Time settings are preset at the factory as
indicated in the Capacity & Time table, at right:
Connection to Water System
The Flow Meter has
water system using
Operating the Digital Flow Meter
The meter is automatically on when there is water flowing through the sensor. The meter is
automatically off when no water is flowing for 10 seconds.
Display Button
Pressing the Display button shows the three
values that the flow meter tracks: The flow
rate in gallons per minute, the remaining
number of days and the remaining gallons.
Alarm
The buzzer beeps once and the display flashes to notify you that the filter cartridge will need to
be changed soon. This alarm occurs when the capacity goes below 30 gallons or when the
remaining time is less than 7 days. The alarm displays when water is flowing through the flow
meter or when you press the Display button.
Warning Alarm
When Capacity reaches 0 gallons or Time reaches 0 days, the buzzer beeps twice and the display
flashes to notify you to change the water filter cartridge right now. This alarm displays when there
is water flowing through the flow meter or when you press the Display button.
Low Battery Alarm
When the battery power is low, the buzzer will beep twice and an icon will
display to notify you to change the batteries. Capacity and timing data will be
kept in memory when the battery power is low or when the battery is removed
and changed.

OPERATION

3
/
" NPT female threaded fittings allowing the meter to be connected to the
8
3
/
" NPT male threaded fittings.
8
BATTERIES
+
DISPLAY
Digital Flow Meter
RESET
Model
SPS600V
SPS620V
1.05
162
g/m
– 4 –
+
COVER
1 2 3 4 5 6 7
1 2 3
1 2 3 4
1 2 3 4 5 6 7
1 2 3 4
Fig. 2
CAPACITY & TIME
Capacity
gal
7,500
15,000
890
days
570
Time
days
180
180
gal
gal

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scaleblocker sps620v

Table of Contents