Troubleshooting - JVC AV-36360 User Manual

AV 32/36S33/36/320/330/360 ENG 10/2/02 _19 PM Page 49
Troubleshooting
The_ is no power
111¶
• See if the powel coi_ became unplugged
• Check fora blown fuse ol circuit b teakel ol a power outage
There is no p ctule * The antenna could be disconnected
or sound * The input mode could be set impropefly_ See page 45
• The tuner (Auto Tuner Setup} could be set [mproperl_ See page 25
• The TV station may be having difficulties Check to see if other stations are working
Remote controE is not • Check to see that the batteries are stJ]Jworking and properly installed
operating p_per_y or • Make sure the remote has a clear sight path to the T_
at aft • Check that the TV/CATV switch is in the proper position (RM_C254 and RM_C255 only)
• You may be too far from the TV_ You must be within 23 feet (7 metels)
You cannot select a • Make sure the channels have been programmed¸ See 'rChanneE Summary< page 28
cer[ain channel • Check to see if the channel is locked¸ See "Channel Summary - Lock" page 28
The power turns off • Make sure the set did not become unplugged
by itself • Perhaps the On/Off Timer is set See page 40
• Check to see if the Sleep Timer was set See page 44
The clock is wrong • The power was [nferrupfed and the clock was not reset¸ See page 26
The On Timer }s • There is a problem with the TV_ Unplug the set and call for service¸
blinking
The color quality • Tint and Color may be improperly adjusfed See page 37
_s poor • The Video Status mode may be turned to the w_ng setting¸ See page 44
The_ are lines • There couJd be inter ference from another electrical appliance_ such as a computer,
across the picture another TV or VCR Move any such appl}ances further away from the TV_
The picture }s spotted • There could be interference from a high-wattage appliance, like a hm_dryer or vacuum,
operating nearb_ Move the antenna away from the appliance or change to a coaxia_
cable conr_ection which Js less p_one to infer ference
The_ are double • A building or passing a_rp]ane can reflect the original signal and ploduce a second,
pictures (ghosts} slightly delayed one Ad}ust your antenna position¸
Picture is snowy • YotJr antenna may be damaged, disconnected or turned Check the antenna
{image noise) connection If the antenna is damaged, replace it
Screen is 40% black • The Closed Caption Text mode }s on Turn it off }n the Closed Caption Menu, page 41
Stereo or bil}ngual • Make sure the MTS settings a_ correct¸ See "MTS" on page 39
p_grams can't be
hea_
The_ is no picture • Check your AV Cables to make sure they are connecfed tightly and ploped_
being displayed for • in case you are conrlecting using component cables to V2, make sure in the onscreen
V2 COMPONENT-IN* menu system, you have 'ryEs_' selected for the V2 COMPONENiqN
See page 17 and 42
• in case you are connecting using composffe cables to V2, make su_ you have 'NO"
selected for the V2 COMPONENiqN See page 17 and 42
AV-36320 and AV 32320 have "V1 COMPONEN F-IN'r _nstead of _V2 COMPONEN FqN_
Static electricity • it is normal to feel static electricity if you brush or touch the sc_en
You hear OCCaSional • It is normal for the TV to make crackling sounds when firs[ turned on or off Unless
crackling sounds the sound or picture become abnormal, this }s fine¸
49