Table of Contents
Advertisement
AV
32/36S33/36/320/330/360
ENG
10/2/02
_19
PM
Page
12
I
Step Two - Making
Basic
Connections
Next you will need to connect your television to an antenna or cable system. The most basic
antennaJcable connection is shown below. For more detailed connections, such as ones where
a cable box is required, see pages 15 to 16.
WALL
CABL
or ANIENNA
OUI
B-
Cable/R F connector
/
1) Connect an RF cable out from the wall outlet in to the RF input on the back of the TV.
Illustration of AV-32360
You may also wish to connect a VCR at this point. A basic VCR connection is shown below.
For detailed instructions
on connecting a other components
or a home theater system, see
pages 15 to 17.
Note: A VCR is not required to operate your television.
VCR
I I N
v_V
L
R
I
AV Cables/Plugs
• I
Illustration of AV-32360
t) Connect the yellow video cable out from the VCR's Video Output, in to the TV's Video input
jack, OR connect an S-Video cable from the VCR's S-Video output, to the TV's S-Video
input.
2) Connect the white audio cable out from the VCR's Left Audio Output, in to the TV's Left
Audio Input Jack.
3) Connect the red audio cable out from the VCR's Right Audio Output, in to the TV's Right
Audio input jack.
Finally, once you have finished your connections,
plug the power cord into the nearest power
outlet and turn on the television.
12
Proceed to Step Three
Advertisement
Table of Contents
