Table of Contents
Advertisement
ENGLISH
Thank you for purchasing the Peavey XR® 560! The XR 560 is a six-channel mixer with a
variety of built-in features, including a dedicated line input channel (for a tape deck or other line
level device), 16-bit digital reverb with time and color controls, seven-band EQ featuring
Peavey's exclusive FLS™ Feedback Locating System and a 150W power amplifier, all housed
in a rugged topbox package.
CHANNEL FEATURES (CHANNELS 1-5)
1.
MIC INPUT
XLR balanced low impedance channel input optimized for a microphone or other
low impedance source. Pin 2 is the positive input. This connector has +15 V phantom
power supply on pins 2 and 3 at all times (pin 1 is the ground reference).
2.
Hl-Z INPUT (CHANNELS 1 -2)/LINE INPUT (CHANNELS 3-5)
Fli-Z input -1/4" unbalanced input for use with high impedance microphones, acoustic/
electric guitars or other high impedance sources equipped with a 1/4" plug (TS).
Line input-1/4" unbalanced input that accepts line level sources equipped with a 1/4"
plug (TS). The two inputs (XLR and 1/4") cannot be used simultaneously.
3.
GAIN
Sets the level of the individual channel in the mix. (Channels 1-6)
4.
REVERB SEND
Sets the level of the internal reverb for the channel and must be used in conjunction
with the master reverb level. It is post gain and will be affected by the gain (3)
adjustment.
Advertisement
Table of Contents
