Playing Back The File Just Recorded - Hitachi MP-EG1A Instruction Manual

Chapter 4
Playback _ _ _ _ _ _ _ _ _ _
■ Playing
Back the File Just Recorded
If you want to play back the file just recorded, perform the following procedure:
*
The displayed date and time during playback are fixed the data
and time on which you started recordmg. The date and time dose
not change even as moving picture playback progresses.
0
Set the CAM/OFF/PLAY switch to PLAY.
Hold down the red button at the center of the switch and set the
switch to PLAY. The picture you recorded just before (in case
of moving pictures, the start picture of the file) will appear on
the LCD monitor.
*
If
you have played back some file immediately before, the picture
played back last will appear.
* If
the menu for Media Navigation appears (see page 47), press the
MEDIA NAVIGATION button.
e
Press the PLAY button.
The pictures and sound will be played back.
• In case of moving picture :
Both picture and sound will be played back. When playback reaches the end, the start picture of the
file will be displayed and playback will stop.
• In case of
a
still picture :
The picture will be displayed as it is.
• In case of consecutive still pictures:
The last still picture will be displayed.
• In case of still picture with audio:
The still picture will be displayed and sound will be played back.
C
Adjusting the volume . • • . . . )
When you hear the sound from the built-in speaker, use the ZOOMNOL button to adjust the
volume. Pressing
+
increases the volume, and pressing - decreases the volume. When this button
is pressed, the volume bar will appear on the left end of the LCD monitor.
*
When you connect the MP-EG IA to a TV, be sure to adjust the volume on the TV.
Press the REC button to pause the playback of moving pictures or a still picture with audio.
Press the REC button again to resume playback.