HP BENCH Series Operating And Service Manual page 34

SECTION VII
CIRCUIT DIAGRAMS
This section contains the circuit diagrams neces
sary for the operation and maintenance of this
power supply. Included are:
a. Component Location Diagram, Figure
7-1, which shows the physical location and refer
ence designator of parts mounted on the printed
wiring board.
b. Schematic Diagram, Figure 7-2, which
illustrates the circuitry for the entire power supply.
Voltages are given adjacent to test points, identi
fied by encircled numbers on the schematic and
printed wiring board.
7-1