HP BENCH Series Operating And Service Manual page 3

MANUAL CHANGES
DC POWER SUPPLY
Model 6215A
Manual Serial Number Prefix 8M
Make all corrections in the manual according to errata below, then check the following table for your power
supply serial number and enter any listed change (s) in the manual.
SERIAL
MAKE
CHANGES
Prefix Number
9C 4201 - 4450
1
ALL
-
Errata
9C
4451 - up
1,2
CHANGE 1:
In replaceable parts table, make the following
change:
R12: Change to IKn. ±5% 3W, Part No. 0813-
0001.
ERRATA:
On Page 5-4, Figure 5-5, change Rl for Models
6215A and 6216A to 62.5,^..
Change Paragraph 3-18, third sentence to read as
follows:
"The output of each power supply can be set
separately."
CHANGE 2:
In replaceable parts table, make the following
change:
R28: 820^, ±5%, ^W, ($ Part No. 0686-8215.
ERRATA:
On the Title Page, change the serial number in
formation to read: "FOR SERIALS 8G2501-4200.
For Serials Below 8G2501, Refer to Appendix A."
4-27-70