Canon EOS 3000N Instructions Manual page 58

ISO Setting the ISO Film Speed
If the film is not DX-coded or if you want to set a different film speed, you
can set the film speed manually after loading the film Into the camera. The
settable film speed range Is ISO 6 to 6400.
Turn the Command Dial to <ISO>.
• The
<ISO>
Icon and the current ISO
film speed will be displayed on the
LCD panel.
HOG
ISO
Turn the
<^>
dial until the
desired ISO film speed appears
on the LCD panel.
Turn the Command Dial to the
desired mode.
[
5
I The manually-set film speed will be canceled if the film is taken out and DX-
coded film is loaded.
Using the Remote Switch
The Remote Switch RS-60E3 (optional) can be used in all the shooting
modes.
Connect the Remote Switch RS-
60E3's (optional) plug to the camera's
remote control terminal. Press the
release button to take the picture.