Installing the Batteries and Checking the Battery Level
Checking the Battery Level
Check the battery level after replacing the batteries and before using the
camera.
Turn the Command Dial to a
shooting mode.
• The camera will then turn on and the
LCD panel will display one of the
following battery level icons:
« : Battery level OK.
CM
:
The battery level is low. Keep
spare batteries handy.
: The batteries will soon be
^
completely exhausted.
: Replace the batteries.
"''
(->page 7)
Battery Life
(With 24-ex. rolls)
Temperature
0% Flash Use
50% Flash Use
100% Flash Use
At 20*C
85 rolls
35 rolls
17 rolls
At-10*C
60 rolls
25 rolls
12 rolls
• The Battery Life table above is based on Canon's testing conditions using
an EF 50mm f/1.4 USM lens and new batteries.
W • If nothing is displayed on the LCD panel, the batteries may have been installed
incorrectly. Take out the batteries and install correctly, (^page 16)
• Pressing the shutter button halfway for a prolonged period or operating only the
autofocus without taking a picture will still consume battery power. It will reduce
the number of rolls that can be taken with the batteries.
Q When not using the camera, set the Command Dial to <
>.
17