Table of Contents
Advertisement
TYRE - START
When entering the function with the buttons (1) and
C
(2), select the "START" flashing item and press
ENTER (3); the instrument panel shows the
instructions to proceed with calibration (C).
"SPEED 49-51" and "GEAR 2" are displayed scrolling
to indicate to keep the speed constant between 49
(30 mph) and 51 Km/h (32 mph), with second gear
engaged. The speed and engaged gear value flashes
until the value reached corresponds to the indicated
speed and gear conditions.
Fig 108
When the rider complies with the required
conditions of speed and gear indicated the
instrument panel, system calibration starts.
Calibration is done by maintaining the speed and
D
gear within the given parameters for 5 seconds.
If the teach-in procedure is completed correctly, the
instrument panel shows "ENDED" (D) followed by
the previous screen after a few seconds.
The procedure can be aborted by holding button (1)
pressed for a long time: in this case the instrument
panel displays the message "ABORT", followed by
the previous screen after a few seconds.
Fig 109
177
Advertisement
Table of Contents
