Samsung HP-P5071 Owner's Instructions Manual page 22

To complete this connection you will need a _'o-way splitter, an RF (A/BI switch, and four coaxial
cables (which you can buy from your Samsung dealer or any electronics store).
1
Find and disconnect the cable that is
connected to the ANTENNA iN terminal of
your came box.
This terminal might be labeled "ANT IN",
"VHF IN" or simply, "IN". Connect this
cable to a two-way splitter.
ANTENNA .................................................. _-- nn_b-_"
,ooom,o0
Cable
Connect a coaxial cable be_'een an
OUTPUT terminal of the splitter and the
IN terminal of the cable box.
Incoming
Cable
Splitter
Splitter
Cable Box
Connect a coaxial cable between the ANTENNA OUT terminal of the cable box
and the B-IN terminal of the AiB switch.
Incoming
Cable
Splitter
Cable Box
RF (A/B)
Switch
Connect a coaxial cable be_'een the
ANTENNA OUT terminal of the cable box
and the B-IN terminal of the A/B switch.
Incoming
Cable
Splitter RF (A/B)
Cable Box Switch
Spl_tter RF (A!B)
Cable Box Switch
Connect the last coaxial cable be_'een the
OUT terminal of the RF (A/B) switch and
the VHF!UHF terminal on the PDP.
Incoming
Cable
After you've made this connection, set the A/B switch to the "A" position for normal viewing.
Set the A/B switch to the "B" position to view scrambled channels. (When you set the A/B switch
to "B", you will need to tune your Set-Top Box to the cable box's output channel, which is usually
channel 3 or 4.}