Setting Up Your Phone
SETTING UP YOUR PHONE
Now that you've checked the contents of the carton, it only takes a few steps to set
up your phone.
STEP 1. CHOOSE A CENTRAL LOCATION FOR THE BASE
The base should be away from all other electronic equipment such as the
microwave, personal computer, stereo, television, VCR or other cordless telephones.
It is also a good idea to place the unit away from noisy areas, or from heat sources
such as a radiator or direct sunlight.
You can set your telephone on a tabletop or you can mount the phone on a wall.
STEP 2. PLUG IN THE CORDS
This section instructs you how to install your telephone for either desk-top or wall
mount use.
For Use on a Tabletop:
It is optional to install the mounting bracket.
If you do...
1. Place the mounting bracket over the top
half of the base with the hooks in the middle
square slots. (The mounting bracket fits
only one way into slots.)
2. Snap the bracket onto the phone.
3. Take one end of the long telephone line
cord and plug it into the jack labeled
TELCO
on the base.
4. Plug the other end of the phone cord into
the wall outlet.
5. Plug the AC adapter tip into the
securely plugged into the jack.
6. Take the large end of the AC adapter and plug it into a wall outlet. Be sure that the
wall outlet is not controlled by a light switch.
120V WALL
OUTLET
TELEPHONE
WALL OUTLET
TELEPHONE
CORD
DC 9V
AC ADAPTER
jack on the base. Be sure that the tip is
DC9V
JACK
- 4 -
BASE
TELCO
JACK