VTech V2675 User Manual page 12

Enter Base ID Code
1.
After charging the Handset, if
the
SEARCHING FOR BASE,
press NEW. You will see ENTER
BASE ID. If the screen already
says ENTER BASE ID, go to
step 2.
2.
Enter the 15 digit Base Unit ID
code, located on the underside
of the Base Unit.
3.
Press OK. The Handset will
display: PLEASE WAIT!!
4.
Wait approximately 15 seconds.
The Handset will display:
FOUND BASE
If the Handset displays: BASE
BUSY
indicates that the system is in
use. Wait until the Base Unit is
in the idle (on hook) mode, and
repeat steps 2 to 4.
NOTE: Occasionally, it may take
longer than 15 seconds for the Handset
to confirm registration to the Base Unit.
This is normal.
Congratulations! You can now enjoy
the benefits of your multi-Handset
system.
91-5358-10-00.p65
Registration of Additional Handsets
screen displays
TRY LATER, this
12
12 1/22/2003, 5:20 PM