Table of Contents
Advertisement
AUTO ANSWER ON/OFF
Factory default setting is Auto
Answer OFF.
With Auto Answer set to OFF,
when the phone is on cradle, you
cannot simply pick up the phone to
answer incoming call, you must
press PHONE to answer the call.
This allows you to review the Caller
ID information before answering.
However, if you prefer to have your
Handset automatically answer the
call when removed from the Base
cradle:
Select AutoAns On/Off (Menu se-
lection #7).
The Handset will dis-
play:
Press ON (or OFF if you're canceling
Auto Answer), then SAVE. The screen
will display Setting Updated, and re-
turn to the idle mode display.
SET TONE /PULSE
Your VT1721 is preset for tone
dialing.To change the dialing mode
setting, choose SET TONE/PULSE
(Menu selection #8), the screen will
display:
Press TONE or PULSE, depending
on the requirements of your local
telephone provider.If you are not sure,
contact your local phone company.
Press SAVE. The screen will confirm
that the dialing mode is updated, and
then return to the idle mode display.
32
Advertisement
Table of Contents
