Sprint sp2621 Owner's Manual page 32

FCC and ACTA Regulations
Administrative Council for Terminal Attachments (ACTA). We are required
to provide you with the following information.
1. Product identifier and REN information
The label on the back or bottom of this equipment contains, among other things,
an identifier indicating product approval and the Ringer Equivalence Number
(REN). This information must be provided to your local telephone company
upon request. For equipment approved prior to July 23, 2001, the product
identifier is preceded by the phrase "FCC Reg No." and the REN is listed
separately. For equipment approved after that date, the product identifier is
preceded by "US" and a colon (:), and the REN is encoded in the product
identifier without a decimal point as the sixth and seventh characters following
the colon. For example, the product identifier US:AAAEQ03T123XYZ would
indicate an REN of 0.3.
The REN is used to determine how many devices you may connect to your
telephone line and still have them ring when you are called. In most, but not
all areas, the sum of all RENs should be five (5.0) or less. For more information,
please contact your local telephone company.
2. Connection and use with the nationwide telephone network
The plug and jack used to connect this equipment to the premises wiring and
the telephone network must comply with the applicable Part 68 rules and
technical requirements adopted by ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to
a compatible modular jack that is also compliant. An RJ11 jack should normally
be used for connecting to a single line and an RJ14 jack for two lines. See
Installation Instructions in this user's manual. This equipment may not be used
with Coin Telephone Lines or with Party Lines. If you have specially wired
alarm dialing equipment connected to your telephone line, ensure the
connection of this equipment does not disable your alarm equipment. If you
have questions about what will disable alarm equipment, consult your
telephone company or a qualified installer.
3. Repair instructions
If this equipment is malfunctioning, it must be unplugged from the modular
jack until the problem has been corrected. Repairs to this telephone equipment
can only be made by the manufacturer or its authorized agents. For repair
procedures, follow the instructions outlined under the Limited Warranty.
4. Rights of the telephone company
If this equipment is causing harm to the telephone network, the telephone
company may temporarily discontinue your telephone service. The telephone
company is required to notify you before interrupting service. If advance notice
is not practical, you will be notified as soon as possible. You will be given
the opportunity to correct the problem and the telephone company is required
32