Page 1
Introduction IMPORTANT: The 2422 is an Accessory Handset for use with the 2432 Sprint GIGAPHONE system. You must have the 2432 in order to use the 2422 Accessory Handset. This manual is designed to familiarize you with the 2422 Accessory Handset setup, registration and basic functions.
Important Safety Instructions Important Safety Instructions Important Safety Instructions Important Safety Instructions Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Read and understand all instructions.
Getting Started Getting Started Getting Started Getting Started Getting Started Registration And Operation Of The 2422 Accessory Handset Your Sprint GIGAPHONE system can operate up to 4 Handsets. The accessory Handset consists of the following: Setup Accessory Handset Setup 2422 The original Handset that is shipped with your Sprint GIGAPHONE system will be automatically registered to the Base.
Enter Base ID Code After charging the Handset, remove it from its Charge Cradle, the screen will display: Press NEW, then enter the 15 digit Base Unit ID code, located on the underside of the Base Unit. Press OK. The Handset will display: PLEASE WAIT!! Wait approximately 15 seconds.
Handset Operation Handset Operation Handset Operation Handset Operation Handset Operation Handset Icons Icon Description Line In Use indicator On steady with no number next to it when a parallel set is in use. On steady with one or more numbers next to it, indicating which extensions are using the line.
Taking Care Of Your Telephone Your Sprint GIGAPHONE cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the Handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it. Avoid water Your telephone can be damaged if it gets wet.
You Hear Other Calls While Using Your Phone • Disconnect your Base Unit from the telephone jack, and plug in a regular telephone. If you still hear other calls, the problem is probably in your wiring or local service. Call your local telephone company. You Hear Noise In The Handset, And None Of The Keys Or Buttons Work •...
This equipment complies with Parts 15 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS- 03 of Industry and Science Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.