Wire Your System - Crown 14M Operation Manual

2 Setup

2.5 Wire Your System

Typical input and output wiring is shown in Figure 2.6.
INPUTS: Connect microphones or balanced line-level
sources to mixer balanced inputs. Set Mic/Line switches
accordingly. Connect unbalanced line-level signals to
RCA input connectors.
OUTPUTS: Maintain proper polarity (+/–) on output
con nectors.
For more application drawings, see the enclosed
Commercial Audio Mixer Quick-Start Guide.
NOTE: Crown provides a reference of wiring pin
assign ments for commonly used connector types in the
Crown Amplifi er Application Guide available at www.
crownaudio.
page 10
280A, 180A or 1160A
Power Amplifier
Figure 2.6 Input and Output Wiring
Commercial Audio Series Mixers
LM-301A
LM-201
PZM-11LLWR
Satellite Receiver
Dual Drive CD
CD
DVD / VCR
Operation Manual