Kenwood TH-25A Series Instruction Manual page 18

7. Push up on the release button and set the terminal plate
in the hole of the release button. Replace the terminal
plate and tighten the screws to complete the installa-
tion. Do not pinch the wiring when closing the terminal
plate.
3-6-4 AUTOPATCH
(TH-25AT/45AT/55AT U.S.A. version only)
switch.
2. Now press the keys just as you would dial a telephone.
Audio tones (Hz)
Note:
Some repeaters will require a fer] 1209 | 1336 | 1477 | 1633
Row
special sequence of keys to ac-
tivate the Autopatch. Again
you should check with the con- 507 u 2 i) A
trol operator of your repeater | 770 4 S 6 B
for this sequence. 852 7 8 9 c
941 * 0 # D
3-7 BEEP TONE
Scale Frequency Key operation
(He)
A 440.00 | CALL, REV, T.ALT, TONE, CTCSS, MHz, M, SCAN
OFF
B 493.88 | SCAN STOP
ce 523.25 | VFO MODE SELECTION, MEMORY SHIFT
cH 564.37 | — OFFSET
D 587.33 | SIMPLEX
Dé 622.26 | + OFFSET
E 659.25 | MR MODE SELECTION
F 698.46 | To complete the MEMORY Entry
To complete the CTCSS Frequency selection
6
783.98 | CALL, REV, T.ALT, TONE, CTCSS, MHz, M, SCAN ON
G# 830.61 | MEMORY CHANNEL selection
CTCSS Frequency selection
A 880.00 | M, ODD SPLIT
Af 932.33 | STEP SIZE selection
B_|__987.77__| AUTOMATIC POWER OFF
F 1396.91 _| Key operation without effect
2000 T.ALT alarm
19