Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Hotpoint GC640SX

  • Page 1: Table Of Contents

    Description of the appliance, 7 Overall view Start-up and use, 8 Practical advice on using the burners Precautions and tips, 9 General safety Disposal GC640SX Recycling & Disposal Information GC640SW Maintenance and care, 10 Switching the appliance off Cleaning the appliance Gas tap maintenance...
  • Page 2: Installation

    Installation ! The installation instructions for cooking ranges shall fitted with air circulation tubes as described above. include a recommendation that such appliances However, these rooms must not be communal rooms, should not be placed adjacent to a door access to bedrooms or rooms that may present a fire hazard.
  • Page 3: Gas Connection

    Gas connection Hook fastening diagram The appliance should be connected to the main gas supply or to a gas cylinder in compliance with current national regulations. Before carrying out the connection, make sure the cooker is compatible with the gas supply you wish to use.
  • Page 4 4. Once this procedure is finished, replace the old rating ! If the appliance is connected to liquid gas, the regulation sticker with one indicating the new type of gas used. screw must be fastened as tightly as possible. Sticker are available from any of our Service Centres. ! Once this procedure is finished, replace the old rating sticker with one indicating the new type of gas used.
  • Page 5: Burner And Nozzle Specifications

    At 15°C and 1013 mbar-dry gas Propane P.C.S. = 50.37 MJ/kg. Butane P.C.S. = 49.47 MJ/kg. Natural P.C.S. = 37.78 MJ/m GC640SX GC640SW DATA PLATE Electrical see data plate connections This appliance conforms to the following European Economic Community directives:...
  • Page 6: Electrical Connection

    Electrical Connection Power supply voltage and frequency: 220-240V a.c. Disposing of the plug 50/60Hz. Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be ! The supply cable must be positioned so that it never accidentally inserted into a socket.
  • Page 7: Description Of The Appliance

    Description of the appliance Overall view GAS BURNERS Support Grid for COOKWARE Control Knobs for GAS BURNERS Ignition Button for GAS BURNERS * SAFETY DEVICES * Ignition for GAS BURNERS * • GAS BURNER ignition* enables a specific burner • GAS BURNERS differ in size and power. Use the to be lit automatically.
  • Page 8: Start-Up And Use

    Start-up and use Practical advice on using the burners ! The position of the corresponding gas burner is shown on every knob. To ensure the burners operate efficiently: Gas burners Each burner can be adjusted to one of the following •...
  • Page 9: Precautions And Tips

    Recycling & Disposal Information • In case of malfunction, under no circumstances should you attempt to repair the appliance As part of Hotpoint's continued commitment to helping yourself. Repairs carried out by inexperienced the environment, Hotpoint reserves the right to use...
  • Page 10: Maintenance And Care

    Maintenance and care Gas tap maintenance Switching the appliance off Over time, the taps may become jammed or difficult to Disconnect your appliance from the electricity supply turn. If this happens, the tap must be replaced. before carrying out any work on it. ! This procedure must be performed by a qualified Cleaning the appliance technician authorised by the manufacturer.
  • Page 11: Troubleshooting

    Troubleshooting It may happen that the appliance does not function properly or at all. Before calling the service centre for assistance, check if anything can be done. First, check to see that there are no interruptions in the gas and electrical supplies, and, in particular, that the gas valves for the mains are open.
  • Page 12 5 Year Parts Guarantee Hotpoint also offers you a free 5 year parts guarantee. This additional guarantee is conditional on you registering your appliance with us and the parts being fitted by one of our authorised engineers. There will be a charge for our engineer’s time.
  • Page 13: After Sales Service

    After Sales Service No one is better placed to care for your Hotpoint appliance during the course of its working life than us – the manufacturer. Essential Contact Information Hotpoint Service We are the largest service team in the country offering you access to 400 skilled telephone advisors and 1000 fully qualified engineers on call to ensure you receive fast, reliable, local service.
  • Page 14 Notes PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24...
  • Page 15 Notes PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24...
  • Page 16 Notes 04/2011 - 195088539.00 XEROX FABRIANO PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24...

This manual is also suitable for:

Gc640sw

Table of Contents