Assembly - Husky H72MWC10BLK-SC Use And Care Manual

Assembly

Two people are recommended for assembly.
CAUTION:
1
Attaching the cabinet handle
□
Position the cabinet handle (B) over the holes on the
cabinet (A).
□
Attach with the bolts (AA) and tighten with supplied
hex key
(BB).
□
Repeat this process on the opposite side of cabinet (A).
The holes in the cabinet are tapped and do not
NOTE:
require nuts.
3
Installation of Power Cord
□
Untie power cord located inside drawer.
□
Gently pull cord plug through grommet.
2
□
□
AA
B
A
6
Attaching the storage hook
Position the storage hook (E) over the holes on the
cabinet (A).
Attach hook (E) using bolts (AA) and tighten with
supplied hex key (BB).
Do not over tighten the bolts.
CAUTION:
E
AA
A