Table of Contents
Advertisement
Preparation
Hardness
English Water
Level
Hardness °dE
Level 0
Level 1
Level 2
Level 3
e out the strip
Wait for 1 minute.
the water and
ke it.
Level 4
Level 5
Perform the same hardness level adjustment that you have set on the control panel also
with the regeneration adjustment switch. For example, if you have adjusted to "3" in the
control panel, also set the regeneration adjustment switch to
3 .
Regeneration Adjustment Switch
If the hardness level of the water that you use is above 90°dF (French standard for water
hardness) or if you are using well water, than it is recommended to use filter and water
purification devices.If the hardness level of the water that you use is below 7°dH, there is
no need to use salt in your dishwasher. In this case, the Salt Indicator light on the control
panel of your dishwasher will light continuously.
If the water hardness is set to level 1, the Salt Indicator will light continuously although it is
not necessary to use salt. If you use salt under this condition, salt will not be consumed and
Dishwasher / User's Manual
German Water
Hardness °dH
0-5
0-4
6-9
5-7
10-15
8-12
16-19
13-15
Make the necessary
adjustment
according to the test
strip.
20-24
16-19
25-62
20-50
French* Water
Water Hardness Level Indicator
Hardness °dF
0-8
Press the Selection key to switch the water hardness level
to position 1. (r1)
9-13
Press the Selection key to switch the water hardness level
14-22
to position 2. (r2)
Press the Selection key to switch the water hardness level
23-27
to position 3. (r3)
Press the Selection key to switch the water hardness level
28-34
to position 4. (r4)
Press the Selection key to switch the water hardness level
35-90
to position 5. (r5)
Level 0
Level 1
Level 2
1
1
Level 3
Level 4
2
3
4
Level 5
5
13 / 45 EN
Advertisement
Table of Contents
